هادی ACSS، جز هادی های پر ظرفیت می باشد، مهمترین تفاوت در فرایند تولید هادی ACSS نسبت به هادی ACSR استفاده از آلومینیوم آنیل شده بجای آلومینیوم H19-1350 م باشد. آلومینیوم آنیل شده هدایت الکتریکی بالاتر و مقاومت الکتریکی کمتری دارد. مهمترین برتری آلومینیوم آنیل شده نسبت به آلومینیوم H19-1350 تحمل حرارتی بالاتر(200 درجه سانتی گراد) آن است. استحکام آلومینیوم آنیل شده از آلومینیوم H19-1350 کمتر است و برای بهبود استحکام کششی هادی ACSS از مغزی فولادی با استحکام بالا استفاده می گردد. مغزی فولادی می تواند به صورت گالوانیزه و یا کلد باشد. استفاده از مغزی فولادی با روکش آلومینیوم(کلد)، خوردگی ناشی از پیل گالوانیکی را کاهش و طول عمر سیم را افزایش می دهد، همچنین با استفاده از مغزی کلد مقاومت الکتریکی سیم ACSS کاهش می یابد.
ACSS conductor is one of the high-capacity conductors, the most important difference in the production process of ACSS conductor compared to ACSR conductor is the use of annealed aluminum instead of H19-1350 aluminum. Annealed aluminum has higher electrical conductivity and lower electrical resistance. The most important advantage of annealed aluminum compared to H19-1350 aluminum is its higher thermal tolerance (200 degrees Celsius). The strength of annealed aluminum is lower than H19-1350 aluminum, and high strength steel core is used to improve the tensile strength of ACSS conductor. Steel core can be galvanized or clad. The use of steel core with aluminum coating (clad) reduces the corrosion caused by the galvanic battery and increases the life of the wire. Also, by using the clad core, the electrical resistance of the ACSS wire is reduced.